You want something light so you can pull of tricks a lot easier. Wheels between mm are usually perfect. Typically, to advanced riders, I recommend 75mm wheels.
These are harder to get moving, but they allow you to go really fast and have a high top speed. These wheels will also give you the best performance over roads, whether they have wavey pavement or a slightly rough surface. For beginners, I recommend downhill wheels around 70mm in size. Personally like mm wheel because of how fast they can go and how smooth they ride. Last but not least, lets talk about thane. Urethane determines how the wheel will slide or how much it will grip, it also determines how much road vibration it absorbs and how fast it rolls.
Soft wheels absorb vibration nicely but are slow and wear fast. Vice versa when it comes to hard wheels.
There are loads of different urethanes and usually, the wheel company tells you what to expect from their urethane. You should also check out wheel reviews to find out more about a wheel; like how it slides, how durable it is and how fast it is before buying it. Urethane comes in degrees of hardness with soft wheels good for this and hard wheels good for that.
Typically, soft wheels are a. Harder wheels are a. Between that spectrum, you have a variety of freeride, downhill, dancing, cruising etc. You want a lightweight wheel for fast acceleration when pushing, and to make sure the overall weight of your board remains light.
Wheels 60mmmm in size, that have a narrow contact patch and radiused lips for less sideways resistance are perfect. Durometer be should between 78aa for good roll speed and vibration absorption. The Orangtang Keanus are a great choice for dancers. They come in a small size of 66mm and have a narrow contact patch of 38mm.
They have a large core and come with stone-ground lips. These wheels will accelerate fast and produce a stiff and responsive ride. The large core will keep them lightweight and easy to pick up the ground. If you do end up choosing them, go with the 83a options. These will roll fast and slide easier for some tricks. Click here to check out the Keanus on Amazon. These wheels coming at 60mm in size and have an 81a durometer.
However, despite being that small, they still roll really fast and produce a comfortable ride. I was surprised by how comfortable they felt when I took them out for the first time. I expected that a wheel that small would feel stiff and would reflect every bump in the road. I also thought the large core would make them feel quite hard. However, despite their size and large core the ride was very smooth.
The wheels were able to handle rougher roads and a cabro surface with ease. I was really surprised by this as it was contrary to what I was expecting. I believe the wheels were able to ride like this partly due to how soft and low rebound the urethane is. Despite being advertised as 81a, the urethane is very soft and cushy. Paired with the large core and small size, they are able to have that quick acceleration but maintain that comfortable ride.
Finally, that large fiberglass core allowed the wheels to be really lightweight. I primarily use these wheels for cruising around these days, but being lightweight makes them easy to ollie, easy to carry around and quick turning. The wheels have a narrow 35mm contact patch and come stone ground. They perform quite similarly to Blood Orange Morgans. You can pick up a set here the Stoked ride shop website. For freeriding, you want a wheel with slidey and durable urethane.
Especially if you are a beginner. You want the wheel to have a rounded lip or bevel shape, so it can break traction easily. You also want the urethane formula to be icey also know as slidey. If you want to learn how to pick the best wheels for sliding, check out my slide wheels guide here. I recommend durable, icey freeride wheels because beginners tend to flatspot their first wheels. I certainly did so and a lot of my friends had the same experience.
A wheel with wear-resistant urethane will not flat spot easily and will last a while. Powell Peralta Snakes have gained a cult-like following in the downhill and freeride community.
This is crazy because the community rarely ever universally agrees on something. Despite being advertised to have a soft 75a durometer. These wheels still slide well, roll decently, and have excellent flat spot resistance.
This is because of the soft slide formula SSF. The SSF formula is high-rebound. This allows it to perform like a higher durometer wheel, but with the desired properties of a lower durometer wheel. The downside is that these wheels chunk a lot. But they do look kinda bad so ….
However, they will outlast and outperform other slide wheels in the market. You can find the Powell Snakes here on Amazon. I would suggest a sharp lipped wheel in 80a durometer. Like an Orangatang 4 prez. This will allow you to learn the basics of taking a corner, sliding for the apex, scrubbing and figuring out how to perfect your slide initiation.
Very similar to the snakes above, these wheels are also poured in the SSF formula. They come in two main colors, green and purple, and they have a skeleton graphic instead of the scales. What makes them different from the snakes and more appropriate for DH is their shape and size.
Unlike the Snakes, these come with a square lip. They also have a wider Finally, they come with a shiny finish which makes them gripper for the first few slides. The wider contact patch and sharp, square lips allow these wheels to be slightly harder to slide than the Snakes. It also gives them more breaking power in the slides. These features make them better for gripping corners, open road DH skating and for dialing in your form.
Find out more about the Powell Krimes here on Amazon. Also, check out Josh Neuman skating with them in the video below. Learning about and finding the perfect wheel for your needs can be a bit of a headache. That said,the experience is the best teacher. What wheels are best for power slides? Can you slide with 80a wheels? Are Spitfire wheels good for street skating? What are good wheels for street skating?
Who owns real skateboards? Who skates AntiHero? How much does a real skateboard cost? Powersliding requires practice and patient. The most important lessons are to learn how to slow down Bert slide, degree Powerslide, and front and backside powerslide. Spitfire is a big name when it comes to skateboard wheels. The Spitfire Formula wheels come in a pack of four at a reasonable price. We highly recommend them for powersliding since they feature 52mm diameters.
Also, the traction on the wheels is impressive, and they hold well on different terrains. Indeed you can surprise your loved one with these wheels on any occasion.
What we enjoy most is the sturdiness with A hardness. Therefore, this makes them a number one choice for Powersliding. They are pretty stable, and you can ride on them with confidence. To conclude, every reviewer has a positive thing to say about these wheels, which is good news for first-time shoppers.
The company CCS has been making stake boarding wheels for over six decades. The quality of CCS wheels is outstanding, and this explains why the brand has a wide following going by the positive reviews.
First of all, the wheels come at an incredibly low price, making them a budget choice for people starting out. Secondly, the package consists of four premium-grade wheels. The best part is that the wheels are suitable for street and park skating. With a A durometer, you can ride them on different surfaces. Overall, the majority of reviewers are impressed by the quality of the wheels, which makes them suitable for powersliding.
The brand has won the hearts of many skateboarders due to the stunning wheels that light up as you roll. Other than that, the wheels are remarkably hardy for long-lasting sporting action. The first thing that amazes most users is the flashiness when they roll. With a size of 32mmx58mm and a 22mm diameter, these are the best wheels for professional skating. Another thing to note is that the wheels are super sturdy at an 82A hardness degree and offer a perfect grip on different surfaces.
We also need to mention that they are comfortable riding indoors as well as outdoors. The wheels are elegant, and you can gift your loved ones anytime. Lastly, the customers are happy with the installation, which they describe as a breeze. If sliding is part of your skateboarding tricks, then these would be the best wheels for you. Why do we say so? Because these wheels have a structure that allows them to glide effortlessly over different terrains.
Also, they are some of the most durable wheels on the market. If you know anything about skateboards, then you must have heard of Powell Peralta. They have quite a reputation for skateboard wheels. They have an optimum thickness that allows them to be faster on longboards or regular boards. That makes them one of the best options for skatepark riding. The 97A hardness makes them grippy on the surfaces. Also, these wheels strike a powered balance between hardness and softness.
That makes them ideal on asphalt as well, besides skater tracks. Another thing that makes them that good is a perfect weight. The lightweight nature makes them easily maneuverable. That makes them one of the best wheels for sliding tricks.
For all their advantages, these wheels also have a few downsides. You will need to get the bearings separately. You will therefore want to be cautious whenever you use them on rugged terrains. If you are looking for wheels that will give you a smooth ride on roads and be good at sliding, then these are the ones for you.
0コメント